STEP 1 - Establish fixing point.
Place hook 2.2 metres above floor level. zRAX recommends fixing hook into timber stud or masonry. Ensure there is enough room on either end to access boards.

STEP 2 - Place hanging rings on fixing point.
Make sure there are no twists in the side panel webbing.

STEP 3 - Connect PVC frame together.
Ensure the foam padded pipe is against the wall. Connect the inner fiberglass rod into the rear corner brackets. Then slide outer tubing over the corner brackets ensuring a tight connection, and repeat for front panel.

 
 
 
 
 
Sizing Chart
 
 
 
 
 
Item

Number of
Racks

Height
(mm)

Width
(mm)

Height
(inches)
Width
(inches)

Combo Model Rack
(fits all types of craft)

4
300
600
12
24
           
           
Demonstration Video
     
© 2017 zRAX | Disclaimer | Site Map